HMC20 is Knife Gate Valve monoblock type LUG two way valve for use with abrasive fluids in low and medium solid concentrations, small and medium particles between 10% – 30%. Specially designed for pipeline of materials coming from mining.
Knife gate valve for assembly between DIN PN10 and ANSI 150lbs flanges, other flanges on request.
The TP model is a very robust two-way wafer bypass knife gate valve, especially for very demanding application and appropriate for handling highly contaminated waste. The closure is designed to withstand applications with a high degree of wear.
-Paper/cellulose industry
-Environment, waste water circuits
-Chemical industry
-Food industry
One-way knife gate valve for assembly between DIN PN10 flanges.
The HAP model is a one-way wafer knife gate valve (with two-way option), specific to applications with high work pressures.
Depending on work conditions and the application, the body can be mono-block, with one welded part, or two robust half-bodies, mechanically welded and joined together.
The RBR-HC model is a wafer-type valve for general use for fluids, although it is also suitable for installations for conveying liquids loaded with solids in suspension.
Unidirectional valve (optionally bidirectional) for mounting between DIN PN10 flanges.
The RBR-PAL-LUG model has features similar to the RBR-PAL, its particularity being that the body has lugs so it completely anchors to the flange. This feature means it can be used at the end of a line.
For general use with fluids, it is also appropriate for installations that conduct liquids laden with suspended solids.
One-way valve (in two-way option) for assembly between DIN PN10 and ANSI 150LBS flanges.
The RBR-PAL model is a wafer valve, for general use with fluids, although it is also appropriate for installations that conduct liquids laden with suspended solids.
One-way valve (in two-way option) for assembly between DIN PN10 and ANSI 150LBS flanges.
The dual plate check valve type DCT is a valve type Wafer.
It is designed without drills in the body, the sealing to the outside is limited to the flange sealing, being the perfect valve for use with steam, gas and liquid to high temperature.
Design according to standard EN-558-1 or API 594, and for assembly between DIN, ANSI, JIS flanges. Available in Carbon Steel.
The DC valve is a dual-plate wafer check valve with EN-558-1 or API 594 design, and for assembly between DIN, ANSI, JIS flanges, etc. Available in standard materials such as EN-GJS-400, Carbon Steel, CF8M, BRONZE, ALUMINIUM BRONZE, as well as special alloys AISI 904L, SUPERDUPLEX 5A, SUPERDUPLEX 6A, DUPLEX 4A, etc.
C/Mallutz, Bloque 3, Ed. 2, Loc. 20-21
20240 Ordizia
Office hours:
M-T: 08:00-13:00 / 15:00-18:00
F: 08:00-14:00
